DIN EN ISO 22475-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); English version of DIN EN ISO 22475-1:2007-01
This part of ISO 22475 deals with the technical principles of sampling of soil, rock and groundwater, and with groundwater measurements, in the context of geotechnical investigation and testing, as described in EN 1997-1 and EN 1997-2.
The aims of such ground investigations are:
a) to recover soil and rock samples of a quality sufficient to assess the general suitability of a site for geotechnical engineering purposes and to determine the required soil and rock characteristics in the laboratory;
b) to obtain information on the sequence, thickness and orientation of strata and joint system and faults;
c) to establish the type, composition and condition of strata;
d) to obtain information on groundwater conditions and recover water samples for assessment of the interaction of groundwater, soil, rock and construction material.
The quality of a sample is influenced by the geological and hydrogeological conditions, the choice and execution of the drilling and/or the sampling method, handling, transport and storage of the samples.
This part of ISO 22475 does not cover soil sampling for the purposes of agricultural and environmental soil investigation. .
NOTE 1 Soil sampling for these purposes is to be found in ISO 10381.
Water sampling for the purposes of quality control, quality characterisation, and identification of sources of pollution of water, including bottom deposits and sludges is not covered.
NOTE 2 Water sampling for these purposes is to be found in ISO 5667
DIN EN ISO 22475-1:2007 Referenced Document
EN 1997-1 Eurocode 7: Geotechnical design - Part 1: General rules*, 2013-11-01 Update
EN 1997-2 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing*, 2010-06-02 Update
EN 791 Drill rigs - Safety (Incorporates Amendment A1: 2009)
ISO 22476-3 Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test AMENDMENT 1
DIN EN ISO 22475-1:2007 history
2022DIN EN ISO 22475-1:2022-02 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for the sampling of soil, rock and groundwater (ISO 22475-1:2021); German version EN ISO 22475-1:2021
2019DIN EN ISO 22475-1:2019 Geotechnical investigation and testing - Sampling of soil, rock and ground water - Part 1: Technical principles (ISO/DIS 22475-1.2:2019); German and English version prEN ISO 22475-1:2019
1970DIN EN ISO 22475-1 E:2018-12 Sampling methods for geotechnical investigation and testing and groundwater measurement Part 1: Technical principles for soil, rock and groundwater sampling (draft)
2007DIN EN ISO 22475-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); English version of DIN EN ISO 22475-1:2007-01
DIN EN ISO 22475-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); English version of DIN EN ISO 22475-1:2007-01 has been changed from DIN 4022-3:1982 .
DIN EN ISO 22475-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); English version of DIN EN ISO 22475-1:2007-01 has been changed from DIN 4022-2:1981 .
DIN EN ISO 22475-1:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); English version of DIN EN ISO 22475-1:2007-01 has been changed from DIN 4022-1:1987 .