ISO 13856-3:2006
Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices

Standard No.

ISO 13856-3:2006

Release Date

2006

Published By

International Organization for Standardization (ISO)

Status

Withdraw

Replace By

ISO 13856-3:2013

Latest

ISO 13856-3:2013

Scope

This part of ISO 13856 gives basic requirements for those pressure-sensitive protective devices, with or without an external reset facility, that are not specified in either ISO 13856-1 or ISO 13856-2, the majority of which are produced for specific applications and are not available as off-the-shelf items. It also gives specific requirements for the following devices: -- pressure-sensitive bumpers; -- pressure-sensitive plates; -- pressure-sensitive wires (trip wires). Its purpose relates primarily to safety and reliability rather than suitability (for the relationship between safety and reliability, see ISO 13849-1:1999, Annex D). It does not specify the dimensions of pressure-sensitive protective devices in relation to any particular application. Specific requirements for particular applications are intended to be set forth in relevant type-C standards (see ISO 12100-1 and the Introduction). This part of ISO 13856 does not cover stopping devices used only for the regular operation (including emergency stopping) of machinery. Nor does it apply to use in locations accessible to elderly or disabled persons or children, where special additional requirements can be necessary.

ISO 13856-3:2006 Referenced Document

• IEC 60068-2-6 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)*， 2007-12-01 Update
• IEC 60204-1:1997 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
• IEC 60439-1:1999 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
• IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*， 2024-04-18 Update
• IEC 60664-1:1992 Insulation coordination for equipment within low-voltage systems; part 1: principles, requirements and tests
• IEC 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices*， 2024-03-26 Update
• IEC 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• IEC 61000-4-2 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measuring techniques - Electrostatic discharge immunity test*， 2008-12-01 Update
• IEC 61000-4-3 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test*， 2020-09-08 Update
• IEC 61000-4-4 Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test*， 2012-04-30 Update
• IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test*， 2024-04-18 Update
• IEC 61000-4-6 Electromagnetic compatibility (EMC) — Part 4-6: Testing and measurement techniques — Immunity to conducted disturbances, induced by radio-frequency fields*， 2023-06-06 Update
• IEC 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments*， 2016-08-10 Update
• ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology
• ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles
• ISO 13849-1:1999 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
• ISO 13849-2 Safety of machinery - Safety-related parts of control systems - Part 2: Validation*， 2012-10-01 Update
• ISO 13855:2002 Safety of machinery - Positioning of protective equipment with respect to the approach speeds of parts of the human body
• ISO 4413 Hydraulic fluid power - General rules and safety requirements for systems and their components*， 2010-11-15 Update
• ISO 4414 Pneumatic fluid power - General rules and safety requirements for systems and their components*， 2010-11-15 Update

ISO 13856-3:2006 history

• 2013 ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
• 2006 ISO 13856-3:2006 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices