SAE AMS4300C-2006
Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding

Standard No.

SAE AMS4300C-2006

Release Date

2006

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4300C-2012

Latest

SAE AMS4300D-2017

Scope

This specification covers boron filaments and 6061-0 aluminum alloy foil laminated and bonded into a composite sheet. These products have been used typically for fabrication of structural components by forming, laminating, and diffusion bonding into structural components where the composite properties of high-modulus boron filaments and aluminum alloy matrix are desirable for use up to 500 °F (260 °C), but usage is not limited to such applications.

SAE AMS4300C-2006 Referenced Document

• ASTM B660-02 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• SAE AMS3865 FILAMENTS, BORON
• SAE AMS4009 ALUMINUM ALLOY FOIL 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-0)

SAE AMS4300C-2006 history

• 2017 SAE AMS4300D-2017 Boron-Aluminum Composite Sheet 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding
• 2012 SAE AMS4300C-2012 Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding
• 2006 SAE AMS4300C-2006 Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding
• 1994 SAE AMS4300B-1994 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B, 6061-0, For Diffusion Bonding
• 1990 SAE AMS4300B-1990 Boron-Aluminum Composite Sheet, 50 V/O 5.6B, 6061-0, For Diffusion Bonding
• 1985 SAE AMS4300A-1985 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding
• 1974 SAE AMS4300-1974 BORON-ALUMINUM COMPOSITE SHEET 50 v/o 5.6B@ 6061-0@ For Diffusion Bonding