This international standard is applicable to audio-frequency induction loop systems producing
an alternating magnetic field at audio frequencies and intended to provide an input signal for
hearing aids operating with an induction pick-up coil.
The standard specifies requirements for the field strength in audio-frequency induction loops
for hearing aid purposes, which will give adequate signal-to-noise ratio without overloading
the hearing aid. The standard also specifies the minimum frequency response requirements
for acceptable intelligibility.
Methods for measuring the magnetic field strength are specified, and information is given on
appropriate measuring equipment (see Annex B), information that should be provided to the
operator and users of the system (see Annex C), and other important considerations.
The standard does not specify requirements for loop driver amplifiers or associated
microphone or audio signal sources, or for the field strength produced by equipment, such as
telephone handsets, within the scope of ITU-T P.370.
IEC 60118-4:2006 history
2017IEC 60118-4:2014/AMD1:2017 Amendment 1 - Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements
2014IEC 60118-4:2014 Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - System performance requirements
2006IEC 60118-4:2006 Electroacoustics - Hearing aids - Part 4: Induction loop systems for hearing aid purposes - Magnetic field strength
1970IEC 60118-4:1981/AMD1:1998 Amendment 1 - Hearing aids. Part 4: Magnetic field strength in audio-frequency induction loops for hearing aid purposes
1981IEC 60118-4:1981 Hearing aids. Part 4 : Magnetic field strength in audio-frequency induction loops for hearing aid purposes