This guide is intended to cover specifications applicable to MAP transducers. It is also applicable to transducers such as Barometric (Ambient) Absolute pressure transducers, Manifold Vacuum transducers, and similar pressure transducers used in automotive systems. Although this guide is oriented towards active devices (those using internal signal conditioning), it can be applied to passive devices with minor modifications.
SAE J1347-1996 Referenced Document
SAE J1113/1-1995 Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (Up to 15 M), and Machines (Except Aircraft) (50 Hz to 18 Ghz)
SAE J1113/11-1995 Immunity to Conducted Transients on Power Leads@ (Technically Equivalent to ISO 7637-2 Except for Test Pulse 5)@ Standard (June 1995)
SAE J1113/12-1994 Electrical Interference by Conduction and Coupling - Coupling Clamp@ Recommended Practice (December 1994)
SAE J1113/13-1995 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge@ Recommended Practice (February 1995)
SAE J1113/21-1994 Road Vehicles - Electrical Disturbances by Narrowband Radiated Electromagnetic Energy - Component Test Methods Part 21 - Absorber-Lined Chamber@ Information Report (October 1994)
SAE J1113/22-1996 Electromagnetic Compatibility Measurement Procedure for Vehicle Components-Part 22-Immunity to Radiated Magnetic Fields
SAE J1113/23-1995 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields@ 10 kHz to 200 MHz@ Strip Line Method@ Recommended Practice (September 1995)
SAE J1113/25-1996 Electromagnetic Compatibility Measurement Procedure for Vehicle Components--Immunity to Radiated Electromagnetic Fields, 10 KHz to 1000 MHz--Tri-Plate Line Method
SAE J1113/27-1995 Electromagnetic Compatibility Measurements Procedure for vehicle Components Part 27 Immunity to Radiated Electromagnetic fields
SAE J1113/4-1995 Immunity to Radiated Electric Fields - Bulk Current Injection (BCI) Method@ Recommended Practice
SAE J1113/41-1995 Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles R(2000)
SAE J1113/42-1994 Electromagnetic Compatibility - Component Test Procedure - Part 42 - Conducted Transient Emissions@ Standard (September 1994)
SAE J1346-1981 Guide to Manifold Absolute Pressure Transducer Representative Test Method, Information Report June 1981
SAE J1347-1996 history
1996SAE J1347-1996 Guide to Manifold Absolute Pressure Transducer Representative Specification
1981SAE J1347-1981 Guide to Manifold Absolute Pressure Transducer Representative Specification@ Information Report