SAE AS95-1995
Fitting Assembly, Cross, Reducer and Nonreducer, Internal Flare on One End, to Flared Tube
Home
SAE AS95-1995
Standard No.
SAE AS95-1995
Release Date
1995
Published By
Society of Automotive Engineers (SAE)
Status
Be replaced
Replace By
SAE AS95-2013
Latest
SAE AS95A-2023
Scope
Fitting Assembly, Cross, Reducer and Nonreducer, Internal Flare on One End, to Flared Tube
SAE AS95-1995 Referenced Document
ASME Y14.5M-1994
Dimensioning and tolerancing
SAE AMS2472
ANODIC TREATMENT OF ALUMINUM BASE ALLOYS Sulfuric Acid Process, Dyed Coating
SAE AMS2486B-1986
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS4124B-1977
Aluminum Alloy Bars@ Rods@ and Wire@ Rolled@ Drawn@ or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T351)
SAE AMS4133
ALUMINUM ALLOY FORGINGS 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6)
SAE AMS4928N-1993
Titanium Alloy Bars@ Wire@ Forgings@ and Rings 6Al - 4V Annealed (UNS R56400)
SAE AMS5639
STEEL, CORROSION AND HEAT RESISTANT 19Cr - 9Ni (SAE 30304)
SAE AMS5646
STEEL@ CORROSION AND HEAT RESISTANT 18Cr - 11Ni - Cb
SAE AMS5648
STEEL, CORROSION AND HEAT RESISTANT 17Cr - 12Ni - 2.5Mo
*
,
1996-05-01 Update
SAE AMS6370K-1990
Steel Bars@ Forgings@ and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE ARP4296-1990
Drawing Interpretations@ Standard Machining Practice@ Tube Fittings and Connectors@ Fluid Systems
SAE AS95-1995 history
2023
SAE AS95A-2023
FITTING ASSEMBLY, CROSS, REDUCER AND NON-REDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
2013
SAE AS95-2013
FITTING ASSEMBLY, CROSS, REDUCER AND NONREDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
1995
SAE AS95-1995
Fitting Assembly, Cross, Reducer and Nonreducer, Internal Flare on One End, to Flared Tube
Copyright ©2024 All Rights Reserved