The scope of this document is to define the following dimensional requirements for hexagon and double hexagon head bolts and nuts having a minimum tensile strength ranging up to 220 ksi. a. Head dimensions (see 3.1); b. shank dimensions (see 3.2); c. geometric control (see 3.3); d. surface texture (see 3.4); and e. dimensions for nuts (see Section 4). For design calculations the SAE AS 8879 coarse threads, UNJC, shall be used for 0.164 size and smaller and fine threads, UNJF, for larger sizes. For particulars of thread runout and lead threads for bolts, see SAE AS 3062. To establish design requirements for bolts, screws and nuts in the UNJ thread inch series primarily for use on propulsion systems. As defined by the Federal Cataloging System, thread sizes less than 0.190 are referred to as screws and larger are referred to as bolts. For the purpose of this document, the term bolt will be used for all sizes.
SAE AS1132G-2004 history
0000 SAE AS1132K-202103
2021SAE AS1132K-2021 Bolts, Screws, and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
2016SAE AS1132J-2016 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
2008SAE AS1132H-2008 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
2004SAE AS1132G-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
2004SAE AS1132F-2004 Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch Series - Design Standard
1998SAE AS1132F-1998 Bolts@ Screws and Nuts - External Wrenching UNJ Thread@ Inch Series - Design Standard
1996SAE AS1132E-1996 Bolts@ Screws and Nuts - External Wrenching UNJ Thread@ Inch Series - Design Standard
1992SAE AS1132D-1992 BOLTS AND SCREWS - EXTERNAL WRENCHING UNJ THREAD, INCH SERIES - DESIGN PARAMETERS FOR
1979SAE AS1132C-1979 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
1976SAE AS1132B-1976 BOLTS AND SCREWS - EXTERNAL WRENCHING UNIFIED THREAD INCH SERIES - DESIGN PARAMETERS FOR
1971SAE AS1132A-1971 BOLTS AND SCREWS-EXTERNAL WRENCHING, UNIFIED THREAD INCH SERIES-DESIGN PARAMETERS FOR,
1970SAE AS1132-1970 BOLTS AND SCREWS-EXTERNAL WRENCHING, UNIFIED THREADED INCH SERIES - DESIGN PARAMETERS FOR,