SAE AMS3570E-1993
Foam, Flexible Polyurethane Open Cell, Medium Flexibility

Standard No.

SAE AMS3570E-1993

Release Date

1993

Published By

Society of Automotive Engineers (SAE)

Status

Withdraw

Replace By

SAE AMS3570E-2001

Latest

SAE AMS3570F-2011

Scope

This specification covers two types of an open-cell, medium-flexibility polyurethane foam in the form of sheet, strip, and shapes. These products have been used typically for general interior padding, cushioning, and vibration insulation, but usage is not limited to such applications. Foam furnished to this specification shall be classified as follows: Type I - Polyurethane Foam - Easter and Type II - Polyurethane Foam - Ester. Type II shall be supplied unless Type I is ordered.

SAE AMS3570E-1993 history

• 2011 SAE AMS3570F-2011 Foam, Flexible Polyurethane, Open Cell, Medium Flexibility
• 2001 SAE AMS3570E-2001 Foam, Flexible Polyurethane Open Cell, Medium Flexibility
• 1993 SAE AMS3570E-1993 Foam, Flexible Polyurethane Open Cell, Medium Flexibility
• 1989 SAE AMS3570D-1989 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
• 1984 SAE AMS3570C-1984 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
• 1977 SAE AMS3570B-1977 FOAM, FLEXIBLE POLYURETHANE Open Cell, Medium Flexibility
• 1963 SAE AMS3570A-1963 FLEXIBLE POLYURETHANE FOAM Open Cell, Medium Flexibility 2.5 lb per cu ft
• 1956 SAE AMS3570-1956 FLEXIBLE POLYURETHANE FOAM Open Cell, Medium Flexibility 2.5 lb per cu ft