This specification covers a polysulfide (T) rubber sealing compound with nonchromated corrosion inhibitors supplied as a two-component system which cures at room temperature. This product has been used typically for contact with air pressures, fuels and water, but usage is not limited to such applications. Each application should be considered separately. Polysulfide (T) rubber has a service temperature range of -65 to +250 degrees F (-54 to +121 degrees C), with short term recurring exposures (approximately 6 hours) to 360 degrees F (182 degrees C). It can be used for aerodynamic smoothing, cabin pressure and fillet sealing and fastener overcoating.
SAE AMS3265B-2002 history
2020SAE AMS3265F-2020 Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)
2015SAE AMS3265E-2015 Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C)
2008SAE AMS3265D-2008 Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-chromated Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
2008SAE AMS3265C-2008 Sealing Compound@ Polysulfide (T) Rubber@ Fuel Resistant@ Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C)
2002SAE AMS3265B-2002 Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Nonchromated Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
2001SAE AMS3265A-2001 Sealing Compound@ Polysulfide (T) Rubber@ Nonchromated@ Corrosion Inhibiting for Intermittent Use to 360 Degrees F (182 Degrees C)
1996SAE AMS3265-1996 Sealing Compound@ Polysulfide (T) Rubber Nonchromated@ Corrosion Inhibiting for Intermittent Use to 340 Degrees C (171 Degrees F)