ISO 15783:2002
Seal-less rotodynamic pumps - Class II - Specification
- Standard No.
- ISO 15783:2002
- Release Date
- 2002
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 15783:2002/Amd 1:2008
- Latest
- ISO 15783:2002/Amd 1:2008
- Scope
- 1 This International Standard specifies the requirements for seal-less rotodynamic pumps that are driven with permanent magnet coupling (magnet drive pumps) or with canned motor, and which are mainly used in chemical processes, water treatment and petrochemical industries. Their use can be dictated by space, noise, environment or safety regulations. Seal-less pumps are pumps where an inner rotor is completely contained in a pressure vessel holding the pumped fluid. The pressure vessel or primary containment device is sealed by static seals such as gaskets or O-rings. 2 Pumps will normally conform to recognized standard specifications (e.g. ISO 5199, explosion protection, electromagnetic compatibility), except where special requirements are specified herein. 3 This International Standard includes design features concerned with installation, maintenance and operational safety of the pumps, and defines those items to be agreed upon between the purchaser and manufacturer/supplier. 4 Where conformity to this International Standard has been requested and calls for a specific design feature, alternative designs may be offered providing that they satisfy the intent of this International Standard and they are described in detail. Pumps which do not conform with all requirements of this International Standard may also be offered providing that the deviations are fully identified and described. Whenever documents include contradictory requirements, they should be applied in the following sequence of priority: a) purchase order (or inquiry, if no order placed), see annexes D and E; b) data sheet (see annex A) or technical sheet or specification; c) this International Standard; d) other standards.
ISO 15783:2002 Referenced Document
- EN 12162 Liquid pumps - Safety requirements - Procedure for hydrostatic testing*， 2009-05-01 Update
- IEC 60034-1 Rotating electrical machines - Part 1: Rating and performance*， 2022-02-14 Update
- ISO 281 Rolling bearings - Dynamic load ratings and rating life*， 2007-02-01 Update
- ISO 3274 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments; Technical Corrigendum 1
- ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane*， 2010-10-01 Update
- ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane*， 2010-12-01 Update
- ISO 5199 Technical specifications for centrifugal pumps - Class II*， 2002-03-01 Update
- ISO 7005-1 Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems*， 2011-07-01 Update
- ISO 7005-2 Metallic flanges; part 2: cast iron flanges
- ISO 7005-3 Metallic flanges; part 3: copper alloy and composite flanges
- ISO 76 Rolling bearings — Static load ratings AMENDMENT 1*， 2006-01-01 Update
- ISO 9906 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3*， 2012-05-01 Update
ISO 15783:2002 history
- 2008 ISO 15783:2002/Amd 1:2008 Seal-less rotodynamic pumps - Class II - Specification; Amendment 1
- 2002 ISO 15783:2002 Seal-less rotodynamic pumps - Class II - Specification
