DIN EN ISO 18276:2006
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2005); English version of DIN EN ISO 18276:2006-09

Standard No.

DIN EN ISO 18276:2006

Release Date

2006

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 18276:2017

DIN EN ISO 18276 E:2015-05

Latest

DIN EN ISO 18276:2023-07

Replace

DIN EN 12535:2000

Scope

This International Standard specifies requirements for classification of tubular cored electrodes with or without a gas shield for metal arc welding of high-strength steels in the as-welded condition or in the post-weld heat-treated condition with a minimum yield strength higher than 550 MPa or a minimum tensile strength higher than 590 MPa. One tubular cored electrode can be tested and classified with different shielding gases, if used with more than one. This document is a combined specification providing classification utilizing a system based upon the yield strength and an average impact energy of 47 J of the all-weld metal, or utilizing a system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal. 1) Subclauses and tables which carry the suffix letter "A" are applicable only to tubular cored electrodes classified under the system based upon the yield strength and an average impact energy of 47 J of the all-weld metal given in this International Standard. 2) Subclauses and tables which carry the suffix' letter "B" are applicable only to tubular cored electrodes classified under the system based upon the tensile strength and an average impact energy of 27 J of the all-weld metal given in this International Standard. 3) Subclauses and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all tubular cored electrodes classified under this International Standard. It is recognized that the operating characteristics of tubular cored electrodes can be modified by the use of pulsed current but, for the purposes of this International Standard, pulsed current is not used for determining the electrode classification.

DIN EN ISO 18276:2006 Referenced Document

• ISO 31-0:1992 Quantities and units; part 0: general principles
• ISO 3690 Welding and allied processes - Determination of hydrogen content in arc weld metal*， 2018-06-30 Update
• ISO 544 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings*， 2017-10-31 Update
• ISO 6847 Welding consumables — Deposition of a weld metal pad for chemical analysis*， 2020-08-21 Update
• ISO 6947:1990 Welds; working positions; definitions of angles of slope and rotation (revision of ISO 6947:1980)

DIN EN ISO 18276:2006 history

• 2023 DIN EN ISO 18276:2023-07 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO/DIS 18276:2023); German and English version prEN ISO 18276:2023 / Note: Date of issue 2023-05-26*Intend...
• 2017 DIN EN ISO 18276:2017-07 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017); German version EN ISO 18276:2017
• 2017 DIN EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017); German version EN ISO 18276:2017
• 2006 DIN EN ISO 18276:2006 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2005); English version of DIN EN ISO 18276:2006-09
• 0000 DIN EN 12535:2000