JB/T 7036-2006 (English Version) PDF

Scope: This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of hydraulic isolated accumulators (hereinafter referred to as accumulators). This standard applies to accumulators with a nominal pressure not greater than 63MPa, a nominal volume not greater than 250L, an operating temperature of -10°C to 70°C, and using nitrogen/petroleum-based hydraulic oil or emulsion as the working medium.

JB/T 7036-2006 Referenced Document

GB/T 2352 Hydraulic fluid power--Gas-loaded accumulators with separator--Ranges of pressures and volumes and characteristic quantities
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)*， 2013-02-15 Update
GB/T 7935 Hydraulic fluid power.General requirements for hydraulic components
HG 2331 Capsules for hydraulic isolation accumulators
JB/T 7034 Hydraulic fluid power.Diaphragm type accumulators.Type and dimensions
JB/T 7035 Hydraulic fluid power.Bladder type accumulators.Type and dimensions
JB/T 7037 Hydraulic fluid power.Accumulators with separator.Test methods
JB/T 7038 Hydraulic fluid power.The shell of accumulators with separator.Technique requirements
JB/T 7858 Method to determine cleanliness and acceptance criterions for hydraulic components*， 2006-12-31 Update

2006 JB/T 7036-2006 Hydraulic fluid power.Accumulators with separator.Technical requirements
1993 JB/T 7036-1993 Specifications for hydraulic isolating accumulators