BS EN 14791:2005
Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method

Standard No.
BS EN 14791:2005
Release Date
2006
Published By
British Standards Institution (BSI)
Status
 2017-03
Replace By
BS EN 14791:2017
BS EN 14791:2006
Latest
BS EN 14791:2017
Replace
03/312902 DC-2003
Scope
This European Standard describes a manual method for sampling and determining SO2 content in ducts and stacks emitting to the atmosphere by two analytical methods: Ion chromatography and Thorin method. This European Standard is the Standard Reference Method (SRM) for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, the user shall demonstrate that the performance characteristics of the method are better than the performance criteria defined in this European Standard and that the overall uncertainty of the method is less than ± 20,0 % relative at the daily Emission Limit Value (ELV). An Alternative Method to this SRM may be used provided that the user can demonstrate equivalence according to the Technical Specification CEN TS 14793, to the satisfaction of his national accreditation body or law. This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration and large combustion installations. It has been validated for sampling periods of 30 min in the range of (0,5 to 2 000) mg/m3 SO2 for Ion Chromatography variant and 5 mg/m3 to 2 000 mg/m3 SO2 for Thorin method according to emission limit values laid down in the following Council Directives:  Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants;  Council Directive 2000/76/EC on waste incineration plants. The limit values of EU Directives are expressed in mg SO2/m3, on dry basis and at the reference conditions of 273 K and 101,3 kPa.

BS EN 14791:2005 Referenced Document

  • EN 13284-1 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method*2017-11-01 Update

BS EN 14791:2005 history

  • 2017 BS EN 14791:2017 Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method
  • 2006 BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method



Copyright ©2024 All Rights Reserved