This method specifies the infrared test of the content of ethylene monomer and propylene monomer in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymer (EPDM) with an ethylene mass percentage between 35% and 85%. method. These four methods cover a variety of industrial polymers that contain additives or polymerized diene monomers that interfere with different infrared peaks. Unless interference is present, the four methods will give the same results. Test methods are given in the following order. Lamination test method Test method A—EPM and EPDM with ethylene mass percentage between 35% and 65%. Test method B—EPM and EPDM with ethylene mass percentage between 60% and 85%, except ethylene/propylene/1,4-hexadiene terpolymer. Test method C - EPM and EPDM with ethylene mass percentage between 35% and 85%, using near infrared. Coating film test method Test method D—EPM and EPDM with an ethylene mass percentage between 35% and 85%, except ethylene/propylene/1,4-hexadiene terpolymer. These test methods are not applicable to oil-filled EPDM unless the filler oil has been previously removed in accordance with Test Method D. This standard uses the International Standard System of Units. This method does not cover all safety issues. If so, it is related to the user. Users of this standard are responsible for establishing appropriate safety and health rules before using this standard and judging the applicability of restricted rules before use. Personnel using this standard should have practical experience in formal laboratory work. This standard does not address all possible safety issues. Users are responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated in relevant national regulations.
SH/T 1751-2005 Referenced Document
ASTM D297 Standard Test Methods for Rubber Products-Chemical Analysis
ASTM D3568 Standard Test Methods for Rubber8212;Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM D4483 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM E168 Standard Practices for General Techniques of Infrared Quantitative Analysis
SH/T 1751-2005 history
2005SH/T 1751-2005 Determination of ethylene units in ethylene-propylene copolymer (EPM) and ethylene-propylene-diene terpolymers (EPDM)