1 This International Standard specifies flame and electrothermal atomic absorption spectrometric methods for the determination of the time-weighted average mass concentration of particulate lead and lead compounds in workplace air.
2 The method is applicable to personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling.
3 The sample dissolution procedure specifies hot plate or microwave digestion, or ultrasonic extraction (11.2). The use of an alternative, more vigorous dissolution procedure is necessary when it is desired to extract lead from compounds present in the test atmosphere that are insoluble using the dissolution procedures described herein.
4 The flame atomic absorption method is applicable to the determination of masses of approximately 1 μg to 200 μg of lead per sample, without dilution [1]. The electrothermal atomic absorption method is applicable to the determination of masses of approximately 0,01 μg to 0,5 μg of lead per sample, without dilution [1].
5 The ultrasonic extraction procedure has been validated for the determination of masses of approximately 20 μg to 100 μg of lead per sample, for laboratory-generated lead fume air filter samples [2].
6 The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user (see 10.1).
ISO 8518:2001 Referenced Document
ISO 1042:1998 Laboratory glassware - One-mark volumetric flasks
ISO 15202-2:2001 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO 648:1977 Laboratory glassware; One-mark pipettes
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling
ISO 8655-1 Piston-operated volumetric apparatus — Part 1: Terminology, general requirements and user recommendations*, 2022-04-22 Update
ISO 8655-2 Piston-operated volumetric apparatus — Part 2: Pipettes*, 2022-04-22 Update
ISO 8655-5 Piston-operated volumetric apparatus — Part 5: Dispensers*, 2022-04-22 Update
ISO 8655-6 Piston-operated volumetric apparatus — Part 6: Gravimetric reference measurement procedure for the determination of volume*, 2022-04-22 Update
ISO 8518:2001 history
2022ISO 8518:2022 Workplace air — Determination of particulate lead and lead compounds — Flame and electrothermal atomic absorption spectrometric methods
2001ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
1990ISO 8518:1990 Workplace air; determination of particulate lead and lead compounds; flame atomic absorption spectrometric method