SAE AMS4123H-2006
Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated

Standard No.

SAE AMS4123H-2006

Release Date

2006

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4123H-2011

Latest

SAE AMS4123L-2024

Scope

This specification covers an aluminum alloy in the form of bars and rods. These products have been used typically for machined parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not involve welding or forming, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.

SAE AMS4123H-2006 Referenced Document

• ASTM B660-02 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products*， 2024-04-18 Update
• ASTM B666/B666M-01 Standard Practice for Identification Marking of Aluminum and Magnesium Products*， 2024-04-18 Update
• SAE AMS2355H-2005 Quality Assurance Sampling and Testing of Aluminum Alloys and Magnesium Alloys, Wrought Products, Except Forging Stock, and Rolled, Forged, or Flash Welded Rings
• SAE AMS2772-1997 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)
• SAE ARP823 MINIMIZING STRESS CORROSION IN WROUGHT HEAT TREATABLE ALUMINUM ALLOY PRODUCTS
• SAE ARP823D-1997 Minimizing Stress-Corrosion in Wrought Heat-Treatable Aluminum Alloy Products
• SAE AS1990-1990 Aluminum Alloy Tempers

SAE AMS4123H-2006 history

• 2024 SAE AMS4123L-2024 Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated
• 2018 SAE AMS4123K-2018 Aluminum Alloy@ Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated (UNS A97075)
• 2018 SAE AMS4123J-2018 Aluminum Alloy@ Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated (UNS A97075)
• 2011 SAE AMS4123H-2011 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
• 2006 SAE AMS4123H-2006 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
• 1999 SAE AMS4123G-1999 Aluminum Alloy, Rolled or Cold Finished Bars and Rods (7075-T651) Solution and Precipitation Heat Treated
• 1994 SAE AMS4123F-1994 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651) Solution and Precipitation Heat Treated
• 1993 SAE AMS4123F-1993 Aluminum Alloy@ Rolled or Cold Finished Bars and Rods 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075- T651) Solution and Precipitation Heat Treated (UNS A97075)
• 1987 SAE AMS4123E-1987 ALUMINUM ALLOY BARS AND RODS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651) Solution and Precipitation Heat Treated
• 1968 SAE AMS4123D-1968 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T651) Stress-Relief Stretched
• 1966 SAE AMS4123C-1966 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T651) Stress-Relief Stretched
• 1965 SAE AMS4123B-1965 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T651) Stress-Relief Stretched
• 1960 SAE AMS4123A-1960 ALUMINUM ALLOY BARS, ROLLED 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T651) Stress-Relief Stretched
• 1960 SAE AMS4123-1960 ALUMINUM ALLOY BARS, ROLLED 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6510) Stress-Relief Stretched