ISO 13628-10:2005
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe

Standard No.

ISO 13628-10:2005

Release Date

2005

Published By

International Organization for Standardization (ISO)

Latest

ISO 13628-10:2005

Scope

1.1 Purpose 1.1.1 This part of ISO 13628 defines the technical requirements for safe, dimensionally and functionally interchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria. See Figure 1 for explanatory figure on typical bonded flexible pipe. 1.1.2 Minimum requirements are specified for the design, material selection, manufacture, testing, marking and packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. See API RP 17B for guidelines on the use of flexible pipes and ancillary components. 1.2 Products 1.2.1 This part of ISO 13628 applies to bonded flexible pipe assemblies, consisting of segments of flexible pipe body with end fittings attached to both ends. This part of ISO 13628 does not cover flexible pipes of unbonded structure. See ISO 13628-2 for guidance on unbonded flexible pipes. NOTE For the purposes of this provision, API Spec 17J[10] is equivalent to ISO 13628-2. 1.2.2 This part of ISO 13628 does not apply to flexible pipe ancillary components. Guidelines for ancillary components are given in API RP 17B. 1.2.3 This part of ISO 13628 can be applied to flexible pipes that include non-metallic reinforcing layers, though no effort was made to address the specific and unique technological aspects of this product. 1.2.4 This part of ISO 13628 can be applied to a bonded construction pipe that includes a material or layer construction that is covered in ISO 13628-2. 1.3 Applications 1.3.1 The applications addressed by this part of ISO 13628 are sweet and sour service production, including export and injection applications. Production products include oil, gas, water and injection chemicals. This part of ISO 13628 applies to both static and dynamic flexible pipes used as flowlines, risers, jumpers and offshore loading and discharge hoses. This part of ISO 13628 applies to pipes with a design pressure greater than or equal to 1,5 MPa (15 bar). This part of ISO 13628 can be used for lower design pressure pipes, though the requirements of these pipes have not been specifically addressed. Reference OCIMF[30] for guidelines on these pipes. 1.3.2 This part of ISO 13628 does not apply to flexible pipes for use in choke and kill line applications. See API Spec 16C for guidance on choke and kill line applications. This part of ISO 13628 can be applied to flexible pipes for pile hammer, gas flare, water supply and jetting applications, though no effort was made to address the specific and unique technological aspects relating to each of these requirements.

ISO 13628-10:2005 Referenced Document

• API RP 17B Recommended Practice for Flexible Pipe (FIFTH EDITION)*， 2014-01-01 Update
• DIN 53505 Testing of rubber - Shore A and Shore D hardness test
• DIN 53516 Testing of rubber and elastomers; determination of abrasion resistance
• EN 10204 Metallic products - Types of inspection documents*， 2024-04-18 Update
• EN 287-1 Qualification test of welders - Fusion welding - Part 1: Steels Incorporating Corrigendum August 2004; Includes Amendment A2:2006
• EN 288-1 
• EN 288-2 
• EN 288-3 Specification and Approval of Welding Procedures for Metallic Materials - Part 3: Welding Procedure Tests for the Arc Welding of Steels Includes Amendment A1: 1997
• ISO 10423 Petroleum and natural gas industries — Drilling and production equipment — Wellhead and tree equipment*， 2022-03-08 Update
• ISO 10474 Steel and steel products - Inspection documents*， 2013-07-01 Update
• ISO 13628-4 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment; Technical Corrigendum 1*， 2011-06-01 Update
• ISO 13665 Seamless and welded steel tubes for pressure purposes - Magnetic particle inspection of the tube body for the detection of surface imperfections
• ISO 1431-1:2004 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing
• ISO 16120-1 Non-alloy steel wire rod for conversion to wire - Part 1: General requirements*， 2017-05-01 Update
• ISO 1817 Rubber, vulcanized or thermoplastic*， 2024-02-01 Update
• ISO 2781 Rubber, vulcanized or thermoplastic - Determination of density*， 2018-06-01 Update
• ISO 34-2 Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces*， 2022-06-22 Update
• ISO 36 Size designation of clothes; Men's and boys' outerwear garments*， 2020-03-04 Update
• ISO 37 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties*， 2017-11-01 Update
• ISO 4647:1982 Rubber, vulcanized; Determination of static adhesion to textile cord; H-pull test
• ISO 4649 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device*， 2017-08-31 Update
• ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method*， 2014-10-01 Update
• ISO 6508-1 Metallic materials — Rockwell hardness test — Part 1: Test method*， 2023-12-13 Update
• ISO 6892 Metallic materials - Tensile testing at ambient temperature
• ISO 812 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness*， 2017-07-31 Update
• ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
• NACE TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments (Item No: 21212)*， 2016-04-18 Update

ISO 13628-10:2005 history

• 2005 ISO 13628-10:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe