International Organization for Standardization (ISO)
Latest
ISO 13628-7:2005
Scope
This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials,
fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating
vessel.
It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing
systems and reuse at different locations and with different floating vessels.
This part of ISO 13628 is intended to serve as a common reference for designers, manufacturers and
operators/users, thereby reducing the need for company specifications.
This part of ISO 13628 is limited to risers, manufactured from low alloy carbon steels. Risers fabricated from
special materials such as titanium, composite materials and flexible pipes are beyond the scope of this part of
ISO 13628.
Specific equipment covered by this part of ISO 13628 is listed as follows:
-- riser joints;
-- connectors;
-- workover control systems;
-- surface flow trees;
-- surface tree tension frames;
-- lower workover riser packages;
-- lubricator valves;
-- retainer valves;
-- subsea test trees;
-- shear subs;
-- tubing hanger orientation systems;
-- swivels;
-- annulus circulation hoses;
-- riser spiders;
-- umbilical clamps;
-- handling and test tools;
-- tree cap running tools.
Associated equipment not covered by this part of ISO 13628 is listed below:
-- tubing hangers;
-- internal and external tree caps;
-- tubing hanger running tools;
-- surface coiled tubing units;
-- surface wireline units;
-- surface tree kill and production jumpers.
ISO 13628-7:2005 Referenced Document
API RP 17B Recommended Practice for Flexible Pipe (FIFTH EDITION)*, 2014-01-01 Update
API Spec 16C Choke and Kill Equipment (THIRD EDITION; API MONOGRAM EFFECTIVE DATE: SEPTEMBER 2021)*, 2021-01-01 Update
API Spec 7 Specification for Rotary Drill Stem Elements Fortieth Edition
BS 7201 Hydraulic fluid power — Gas loaded accumulators — Part 1 : Specification for seamless steel accumulator bodies above 0.5 L water capacity
EN 1418 Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials
EN 287-1 Qualification test of welders - Fusion welding - Part 1: Steels Incorporating Corrigendum August 2004; Includes Amendment A2:2006
ISO 10423:2003 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment
ISO 10432 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment
ISO 10474 Steel and steel products - Inspection documents*, 2013-07-01 Update
ISO 10945 Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports
ISO 11960:2001 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells
ISO 11961 Petroleum and natural gas industries — Steel drill pipe — Amendment 1*, 2020-03-09 Update
ISO 13533:2001 Petroleum and natural gas industries - Drilling and production equipment - Drill-through equipment
ISO 13535 Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment
ISO 13628-2 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications; Technical Corrigendum 1*, 2009-04-01 Update
ISO 13628-4:1999 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment
ISO 13628-5 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals*, 2009-12-01 Update
ISO 13628-6:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems
ISO 1461 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods*, 2022-08-02 Update
ISO 14693 Petroleum and natural gas industries - Drilling and well-servicing equipment
ISO 15156-1 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials*, 2020-11-17 Update
ISO 15156-2:2003 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons
ISO 15156-3 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons*, 2020-11-17 Update
ISO 15579 Metallic materials - Tensile testing at low temperature
ISO 2566-1 Steel — Conversion of elongation values — Part 1: Carbon and low-alloy steels*, 2021-12-15 Update
ISO 377 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing*, 2017-06-01 Update
ISO 6507-1 Metallic materials — Vickers hardness test — Part 1: Test method*, 2023-08-01 Update
ISO 6892 Metallic materials - Tensile testing at ambient temperature
ISO 783 Metallic materials - Tensile testing at elevated temperature
ISO 898-1 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread; Technical Corrigendum 1*, 2013-04-01 Update
ISO 898-2 Fasteners — Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes*, 2022-09-30 Update
ISO 9327-1 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 1: General requirements
ISO 9606-1 Qualification testing of welders — Fusion welding — Part 1: Steels TECHNICAL CORRIGENDUM 1*, 2012-01-01 Update
ISO 9712 Non-destructive testing — Qualification and certification of NDT personnel*, 2021-12-21 Update
ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories [Standard in French]*, 2017-11-01 Update
ISO 13628-7:2005 history
2005ISO 13628-7:2005 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems