This classification system covers polyketone materials suitable for injection molding and extrusion. This classification system does not address recycled polyketone materials. The properties included in this classification system are those required to identify the compositions covered. There may be other requirements necessary to identify the particular characteristics important to specialized applications. These will be agreed upon between the user and the supplier. This classification system and subsequent line call out (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection should be made by those having expertise in the plastic field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system. The following precautionary caveat pertains only to the test method portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1--There is no similar or equivalent ISO standard available.
ANSI/ASTM D5990:2000 history
2000ANSI/ASTM D5990:2000 Classification System for Polyketone Injection and Extrusion Materials (PK)