SAE AS5181-2000
Fitting, Elbow, 90 Degrees, Bulkhead, Flared to Hose FSC 4730; Supersedes AN838

Standard No.

SAE AS5181-2000

Release Date

2000

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AS5181-2015

Latest

SAE AS5181-2015

Scope

Fitting, Elbow, 90 Degrees, Bulkhead, Flared to Hose FSC 4730; Supersedes AN838TABLE 1 - DIMENSIONS AND WEIGHTS

SAE AS5181-2000 Referenced Document

• ASME B46.1-1995 Surface Texture, Surface Roughness Waviness and Lay (B46.1 - 1995)
• ASME Y14.5M-1994 Dimensioning and tolerancing
• SAE AMS-QQ-A-225/6-1997 Aluminum Alloy@ 2024@ Bar@ Rod@ and Wire; Rolled@ Drawn@ or Cold Finished (UNS A92024)
• SAE AMS-QQ-A-225/9-1997 Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold finished
• SAE AMS-QQ-P-35-1998 Passivation Treatments for Corrosion-Resistant Steel
• SAE AMS2472D-1995 Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating
• SAE AMS2488C-1994 Anodic Treatment@ Titanium and Titanium Alloys
• SAE AMS4124C-1997 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged UNS A97075
• SAE AMS4339-1994 Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5Mg 0.60Mn Solution Heat Treated, Cold Worked, and Artificially Aged
• SAE AMS4928N-1993 Titanium Alloy Bars@ Wire@ Forgings@ and Rings 6Al - 4V Annealed (UNS R56400)

SAE AS5181-2000 history

• 2015 SAE AS5181-2015 FITTING, ELBOW, 90°, BULKHEAD, FLARED TO HOSE
• 2000 SAE AS5181-2000 Fitting, Elbow, 90 Degrees, Bulkhead, Flared to Hose FSC 4730; Supersedes AN838