SAE AMS3670/4C-1995
Polyamide-Imide Bar, Rod, and Shapes 30% Glass Fiber

Standard No.
SAE AMS3670/4C-1995
Release Date
1995
Published By
Society of Automotive Engineers (SAE)
Status
Replace By
SAE AMS3670/4C-2000
Latest
SAE AMS3670/4C-2000
Scope
This specification covers a polyamide-imide plastic filled with glass fiber in the form of molded or extruded bar, rod, and shapes. These products have been used typically for parts requiring high strength, thermal resistance, good dielectric properties and toughness up to 230 degrees C (446 degrees F), but usage is not limited to such applications.

SAE AMS3670/4C-1995 Referenced Document

  • ASTM D570-95 Standard Test Method for Water Absorption of Plastics*， 1995-04-17 Update
  • SAE AMS2350BA-1989 STANDARDS AND TEST METHODS
  • SAE AMS3670 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES Molded or Extruded

SAE AMS3670/4C-1995 history

SAE AMS3670/4C-1995 -All Parts

SAE AMS3670-1981 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES Molded or Extruded SAE AMS3670/1-1981 UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES SAE AMS3670/1A-1994 UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES SAE AMS3670/1B-2004 Unfilled Polyamide-Imide Bar, Rod, and Shapes SAE AMS3670/1C-2021 Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material SAE AMS3670/2-1981 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 20 Graphite - 3 Polytetrafluoroethylene Filled SAE AMS3670/2A-1985 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 20 Graphite - 3 Polytetrafluoroethylene (PTFE) Filled SAE AMS3670/2B-2006 Polyamide-Imide Bar, Rod, and Shapes 20 Graphite - 3 Polytetrafluorethylene (PTFE) Filled SAE AMS3670/2C-2021 Molded or Extruded Bar, Rod, and Shapes Produced from 20% Graphite – 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material SAE AMS3670/3-1981 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 12 Graphite - 3 Polytetrafluoroethylene Filled SAE AMS3670/3A-1994 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 12 Graphite - 3 Polytetrafluoroethylene Filled SAE AMS3670/3B-2004 Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite - 3% Polytetrafluoroethylene Filled SAE AMS3670/3C-2021 Bar, Rod, and Shapes Produced from 12% Graphite - 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material SAE AMS3670/4-1984 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Glass Fiber SAE AMS3670/4A-1987 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Glass Fiber SAE AMS3670/4B-1991 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Glass Fiber SAE AMS3670/4C-2000 Polyamide-Imide Bar, Rod, and Shapes 30% Glass Fiber SAE AMS3670/4D-2021 Bar, Rod, and Shapes Produced from 30% Glass Fiber Filled Polyamide-Imide (PAI) Material SAE AMS3670/5-1984 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Carbon (Graphite) Fiber SAE AMS3670/5A-1987 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Carbon (Graphite) Fiber SAE AMS3670/5B-2011 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES 30 Carbon (Graphite) Fiber SAE AMS3670/5C-2000 Polyamide-Imide Bar, Rod, and Shapes 30% Carbon Fiber SAE AMS3670/5D-2021 Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material SAE AMS3670A-1994 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES Molded or Extruded SAE AMS3670B-2003 Polyamide-Imide Bar, Rod, and Shapes Molded or Extruded SAE AMS3670C-2021 Molded or Extruded Bar, Rod, and Shapes Made from Polyamide-Imide (PAI) Plastic Material Both Filled and Unfilled Grades for High-Impact Strength and Mechanical Strength Applications in High Temperature Environments


Copyright ©2024 All Rights Reserved