IEC 60255-22-6:2001
Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment; Immunity to conducted disturbances induced by radio frequency fields
- Standard No.
- IEC 60255-22-6:2001
- Release Date
- 2001
- Published By
- International Electrotechnical Commission (IEC)
- Status
- Latest
- IEC 60255-22-6:2001
- Replace By
- IEC 60255-26:2013
- Scope
- This part of IEC 60255 is based on IEC 61000-4-6, referring to that standard where applicable. It specifies the general requirements for conducted disturbances induced by electromagnetic fields for measuring relays and protection equipment for power system protection, including the control, monitoring and process interface equipment used with those systems. The objective of the tests is to confirm that the equipment under test (EUT) will operate correctly when energized and subjected to conducted disturbances induced by radiofrequency fields within the frequency range 150 kHz to 80 MHz. NOTE IEC 60255-22-3 (based on IEC 61000-4-3) will specify the immunity requirements of measuring relays and protection equipment over the frequency range of 80 MHz to 1000 MHz. The requirements specified in this standard are applicable to measuring relays and protection equipment in a new condition and all tests specified are type tests only. The object of this standard is to establish · terms used; · test severity level; · test equipment; · test set-up; · test procedures; · criteria for acceptance; · test report.
IEC 60255-22-6:2001 history
- 2001 IEC 60255-22-6:2001 Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment; Immunity to conducted disturbances induced by radio frequency fields
IEC 60255-22-6:2001 Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment; Immunity to conducted disturbances induced by radio frequency fields was changed to IEC 60255-26:2013 Measuring relays and protection equipment.Part 26: Electromagnetic compatibility requirements.
