SAE AMS1376B-1992
Remover, Epoxy Paint Acid-Type, Thickened

Standard No.

SAE AMS1376B-1992

Release Date

1992

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS1376B-2018

Latest

SAE AMS1376B-2018

Scope

This specification covers a paint remover in the form of a liquid. This product has been used typically for removing amine-cured, epoxy coating systems from aluminum alloys, but usage is not limited to such applications. This product is not intended for use on aircraft engine components or other high strength steel parts with hardness of 48 HRC or higher.

SAE AMS1376B-1992 Referenced Document

• ASTM D1193-91 Standard Specification for Reagent Water
• FED 
• SAE AMS2470 PROTECTIVE TREATMENTS for ALUMINUM BASE ALLOYS
• SAE AMS2473 CHEMICAL TREATMENT FOR ALUMINUM BASE ALLOYS General Purpose Coating
• SAE AMS2825A-1987 Material Safety Data Sheets
• SAE AMS4037 ALUMINUM ALLOY SHEET Copper Magnesium Manganese
• SAE AMS4041 ALUMINUM ALLOY SHEET AND STRIP, ALUMINUM COVERED Heat Treated-Copper Magnesium Manganese (ALC24S-T)
• SAE AMS4045 ALUMINUM ALLOT SHEET AND PLATE 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (75S-T6)
• SAE AMS4049H-1987 Aluminum Alloy Sheet and Plate@ Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated (UNS A97075)
• SAE AMS4911 TITANIUM ALLOY SHEET 6Al – 4V Annealed – 120@000 psi Yield
• SAE MAM4911 TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 4V Annealed

SAE AMS1376B-1992 history

• 2018 SAE AMS1376B-2018 Remover, Epoxy Paint Acid-Type, Thickened
• 1992 SAE AMS1376B-1992 Remover, Epoxy Paint Acid-Type, Thickened
• 1991 SAE AMS1376A-1991 REMOVER, PAINT Epoxy Paint Systems
• 1978 SAE AMS1376-1978 REMOVER, PAINT Epoxy Paint Systems