SAE AMS4237A-1987
Aluminum Alloy, Castings, Sand, 4.6Cu 0.35Mn 0.25Mg 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged

Standard No.

SAE AMS4237A-1987

Release Date

1987

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS4237A-2000

Latest

SAE AMS4237B-2007

Scope

This specification covers an aluminum alloy in the form of sand castings.Primarily for components requiring a combination of high strength with good ductility and impactstrength. Certain design and processing procedures (See 8.5) may cause these castings to becomesusceptible to stress-corrosion cracking.

SAE AMS4237A-1987 history

• 2007 SAE AMS4237B-2007 Aluminum Alloy Castings@ Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 -T71) Solution Heat Treated and Naturally Aged (UNS A02060)
• 2000 SAE AMS4237A-2000 Aluminum Alloy Castings, Sand 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71) Solution Heat Treated and Naturally Aged
• 1987 SAE AMS4237A-1987 Aluminum Alloy, Castings, Sand, 4.6Cu 0.35Mn 0.25Mg 0.22Ti (206.0-T71), Solution Heat Treated and Naturally Aged
• 1980 SAE AMS4237-1980 ALUMINUM ALLOY CASTINGS@ SAND 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0 -T4) Solution Heat Treated and Naturally Aged