GB/T 17737.2-2000
Radio-frequency cables Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation (English Version)
- Standard No.
- GB/T 17737.2-2000
- Language
- Chinese, Available in English version
- Release Date
- 2000
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 17737.2-2000
- Scope
- This standard specifies the requirements for polytetrafluoroethylene (PTFE) insulated semi-rigid radio frequency coaxial cables. This standard is used together with the general specification (GB/T 17737.1). The purpose of this standard is to specify recommended ratings and characteristics, as well as applicable qualification procedures, test and measurement methods selected from the general specification, and to specify general performance requirements and supplementary test methods for semi-rigid coaxial cables. The test and severity requirements specified in the detail specification referencing this standard shall have an equivalent or higher performance level than this standard.
GB/T 17737.2-2000 history
- 2000 GB/T 17737.2-2000 Radio-frequency cables Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation
GB/T 17737.2-2000 -All Parts
GB/T 17737.1-2013 Coaxial communication cables.Part 1 : Generic specification.General,definitions and requirements
GB/T 17737.100-2018 Coaxial communication cables—Part 1-100: Electrical test methods—General requirements
GB/T 17737.101-2018 Coaxial communication cables—Part 1-101: Electrical test methods—Test for conductor d.c. resistance of cable
GB/T 17737.102-2018 Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable dielectric
GB/T 17737.103-2018 Coaxial communication cables—Part 1-103: Electrical test methods—Test for capacitance of cable
GB/T 17737.104-2018 Coaxial communication cables—Part 1-104: Electrical test methods—Test for capacitance stability of cable
GB/T 17737.105-2018 Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable dielectric
GB/T 17737.106-2018 Coaxial communication cables—Part 1-106: Electrical test methods—Test for withstand voltage of cable sheath
GB/T 17737.107-2018 Coaxial communication cables—Part 1-107: Electrical test methods—Test for cable microphony charge level (mechanically induced noise)
GB/T 17737.108-2018 Coaxial communication cables—Part 1-108: Electrical test methods—Test for characteristic impedance, phase and group delay, electrical length and propagation velocity
GB/T 17737.112-2018 Coaxial communication cables—Part 1-112: Electrical test methods—Test for return loss (uniformity of impedance)
GB/T 17737.113-2024 Coaxial communication cables Part 1-113: Electrical test methods Attenuation constant test
GB/T 17737.115-2018 Coaxial communication cables—Part 1-115: Electrical test methods—Test for regularity of impedance (pulse/step function return loss)
GB/T 17737.122-2018 Coaxial communication cables—Part 1-122: Electrical test methods—Test for cross-talk between coaxial cables
GB/T 17737.2-2000 Radio-frequency cables Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation
GB/T 17737.200-2018 Coaxial communication cables—Part 1-200: Environmental test methods—General requirements
GB/T 17737.201-2015 Coaxial communication cables.Part 1-201: Environmental test methods.Test for cold bend performance of cable
GB/T 17737.203-2018 Coaxial communication cables.Part 1-203: Environmental test methods.Test for water penetration of cable
GB/T 17737.205-2018 Coaxial communication cables—Part 1-205: Environmental test methods—Resistance to solvents and contaminating fluids
GB/T 17737.3-2001 Radio frequency cables Part 3: Sectional specification for coaxial cables for local area networks
GB/T 17737.301-2018 Coaxial communication cables—Part 1-301: Mechanical test methods—Test for ovality
GB/T 17737.302-2018 Coaxial communication cables—Part 1-302: Mechanical test methods—Test for eccentricity
GB/T 17737.308-2018 Coaxial communication cables—Part 1-308: Mechanical test methods—Test for tensile strength and elongation for copper-clad metals
GB/T 17737.310-2018 Coaxial communication cables—Part 1-310: Mechanical test methods—Test for torsion characteristics of copper-clad metals
GB/T 17737.313-2015 Coaxial communication cables.Part 1-313:Mechanical test methods.Adhesion of dielectric and sheath
GB/T 17737.314-2018 Coaxial communication cables—Part 1-314: Mechanical test methods—Test for cable bending
GB/T 17737.316-2018 Coaxial communication cables—Part 1-316:echanical test methods—Test for maximum pulling force of cable
GB/T 17737.317-2018 Coaxial communication cables—Part 1-317: Mechanical test methods—Test for crush resistance of cable
GB/T 17737.318-2018 Coaxial communication cables—Part 1-318: Mechanical test methods—Heat performance tests
GB/T 17737.324-2018 Coaxial communication cables—Part 1-324: Mechanical test methods—Test for abrasion resistance of cable
GB/T 17737.325-2018 Coaxial communication cables—Part 1-325: Mechanical test methods—Aeolian vibration
GB/T 17737.4-2013 Coaxial communication cables.Part 4:Sectional specification for leaky cables
GB/T 17737.5-2013 Coaxial communication cables.Part 5 : Sectional specification for CATV trunk and distribution cables
GB/T 17737.8-2022 Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
GB/T 17737.801-2022 Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric