BS 6043-3.5.1:2000
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method

Standard No.

BS 6043-3.5.1:2000

Release Date

2000

Published By

British Standards Institution (BSI)

Status

Be replaced 2014-07

Replace By

BS ISO 12986-1:2014

Latest

BS ISO 12986-1:2014

Scope

This part of ISO 12986 describes a method for the determination of the bending/shear strength (flexural strength) of prebaked anodes and cathode blocks at temperatures in the range 20 ℃ to 30 ℃. The method is particularly appli-cable to prebaked anodes, but can be applied to cathode blocks. NOTE For the practical application of this International Standard the terms 'bending/shear strength' and 'flexural strength' may be considered equivalent.

BS 6043-3.5.1:2000 history

• 2014 BS ISO 12986-1:2014 Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of bending/shear strength by the three-point method
• 2000 BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method