ISO 15202-1:2000 PDF

Scope: 1 This part of ISO 15202 specifies a method for collecting samples of airborne participate matter for subsequent determination of metals and metalloids using inductively coupled plasma - atomc emission spectrometry. 2 The method is not applicable to the sampling of mercury, which is present in air in the vapour phase at ambient temperatures; inorganic compounds of metals and metalloids that are permanent gases, e.g. arsine (AsH3); or inorganic compounds of metals and metalloids that are present in the vapour phase at ambient temperatures, e.g. arsenic trioxide (As2O3). NOTE Although the method does not describe a means of collecting inorganic compounds of metals and metalloids that are present in the vapour phase, in most instances this is relatively easily achieved by using a back-up filter which has been pre-treated to trap the compound(s) of interest, e.g. a back-up paper pad impregnated with sodium carbonate is suitable for collecting arsenic trioxide (see ISO 11041). 3 The method is applicable to personal sampling of the inhalable or respirable fraction of airborne particles, as defined in ISO 7708, and to static sampling.

ISO 15202-1:2000 Referenced Document

EN 13205 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations*， 2024-04-17 Update
EN 482:1994 Workplace Atmospheres - General Requirements for the Performance of Procedures for the Measurement of Chemical Agents
ISO 15202-2 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation*， 2020-05-05 Update
ISO 15202-3 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis*， 2004-11-01 Update
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling

2020 ISO 15202-1:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
2012 ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
2000 ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling