ISO 9413:1998
Tyre valves - Dimensions and designation
- Standard No.
- ISO 9413:1998
- Release Date
- 1998
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 9413:1998/Amd 1:2001
- Latest
- ISO 9413:2019
- Scope
- This International Standard defines the essential di-mensions and the designation of tube valves and tubeless valves. Annex B gives the correspondence between ISO designations and the designations established by: — TRA (Tire and Rim Association Inc.); — ETRTO (European Tire and Rim Technical Or-ganisation); — JATMA (The Japan Automotive Tire Manufac-turer's Association, Inc.). For an intermediate period, corresponding references as given in annex B are permitted in place of ISO designations. In the remainder of this document, all the dimensions are given at their nominal value except in the case where the tolerances are indicated. The threaded length of valve stems for which no thread length is specified is the maximum possible length. This International Standard does not specify require-ments for the caps which equip the valves, nor do the caps appear in the figures. NOTE The valves drawings are not all at the same scale.
ISO 9413:1998 history
- 2019 ISO 9413:2019 Tyre valves — Dimensions and designation
- 2012 ISO 9413:2012/Amd 1:2012 Tyre valves - Dimensions and designation; Amendment 1
- 2012 ISO 9413:2012 Tyre valves - Dimensions and designation
- 2004 ISO 9413:1998/Amd 2:2004 Tyre valves - Dimensions and designation; Amendment 2
- 2001 ISO 9413:1998/Amd 1:2001 Tyre valves - Dimensions and designation - Amendment 1: Addition of valves using ISO core chamber No. 3
- 1998 ISO 9413:1998 Tyre valves - Dimensions and designation
