GOST 621-1987
Piston rings for internal combustion engines. General specifications
Home
GOST 621-1987
Standard No.
GOST 621-1987
Release Date
1987
Published By
RU-GOST R
Latest
GOST 621-1987
Replace
GOST 621-1979
GOST 7133-1980
GOST 7295-1981
Scope
This standard applies to cast iron compression and oil scraper piston rings of internal combustion engines of nominal
GOST 621-1987 Referenced Document
GOST 10905-1986
Surface plates and face-plates. Specifications
GOST 14192-1977
Marking of cargo
GOST 2789-1973
Surface roughness. Parameters and characteristics
GOST 8.050-1973
State system for ensuring the uniformity of measurements. Reference conditions for linear and angular measuruments
GOST 8.051-1981
State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 9.014-1978
Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
ISO 6621-3:1983
Internal combustion engines; Piston rings; Part 3 : Material specifications
ISO 6622-1:1986
Internal combustion engines; Piston rings; Part 1 : Rectangular rings
ISO 6623:1986
Internal combustion engines; Piston rings; Scraper rings
ISO 6624-1:1986
Internal combustion engines; Piston rings; Part 1 : Keystone rings
ISO 6625:1986
Internal combustion engines; Piston rings; Oil control rings
GOST 621-1987 history
1987
GOST 621-1987
Piston rings for internal combustion engines. General specifications
0000
GOST 7295-1981
0000
GOST 7133-1980
0000
GOST 621-1979
Copyright ©2024 All Rights Reserved