This part of ISO 10767 specifies a procedure for the determination of a rating of the source flow ripple, source impedance and pressure ripple levels gener-ated by positive-displacement hydraulic pumps. Ratings are obtained as the following:
a) the source flow ripple amplitude, in litres per second, over ten individual harmonics of pumping frequency;
b) the source impedance amplitude, in newton sec-onds per metre to the power of five [(N·s)/m], and phase, in degrees, over ten individual har-monics of pumping frequency;
c) the anechoic pressure ripple amplitude, in bars, over ten harmonics of pumping frequency;
d) the overall r.m.s. anechoic pressure ripple, in bars;
e) the blocked acoustic pressure ripple amplitude, in bars, over ten harmonics of pumping frequency;
f) the overall r.m.s. blocked acoustic pressure ripple, in bars.
This part of ISO 10767 is applicable to all types of positive-displacement pump operating under steady-state conditions, irrespective of size, provided that the pumping frequency is in the range from 50 Hz to 400 Hz.
note:1) 1 bar = 10 Pa = 10 N/m
BS ISO 10767-1:1996 history
2016BS ISO 10767-1:2015 Hydraulic fluid power. Determination of pressure ripple levels generated in systems and components. Method for determining source flow ripple and source impedance of pumps
1996BS ISO 10767-1:1996 Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Precision method for pumps