GB/T 15826.9-1995
Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining (English Version)

Standard No.
GB/T 15826.9-1995
Language
Chinese, Available in English version
Release Date
1995
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Status
 2008-08
Replace By
GB/T 21471-2008
Latest
GB/T 21471-2008
Scope
This standard specifies the allowable limit deviation for black leather forgings. This standard applies to forgings whose entire surface is not machined or part of the surface is not machined.

GB/T 15826.9-1995 history

  • 2008 GB/T 21471-2008 Machining allowancs and tolerances for steel open die forgings on hammer.Shafts
  • 1995 GB/T 15826.9-1995 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining

GB/T 15826.9-1995 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining was changed to GB/T 21471-2008 Machining allowancs and tolerances for steel open die forgings on hammer.Shafts.

Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining

GB/T 15826.9-1995 -All Parts

GB/T 15826.1-1995 Machining allowances and tolerances for steel open die forgings on hammer--General requirements GB/T 15826.2-1995 Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns GB/T 15826.3-1995 Machining allowances and tolerances for steel open die forgings on hammer--Disks with holes GB/T 15826.4-1995 Machining allowances and tolerances for steel open die forgings on hammer--Rings GB/T 15826.5-1995 Machining allowances and tolerances for steel open die forgings on hammer--Seamles cylinder hushings GB/T 15826.6-1995 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps GB/T 15826.7-1995 Machining allowances and tolerances for steel open die forgings on hammer--Shaft with steps GB/T 15826.8-1995 Machining allowances and tolerances for steel open die forgings on hammer--Single throw crankshaft GB/T 15826.9-1995 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining


Copyright ©2024 All Rights Reserved