ASTM E520-08(2023)
Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- Standard No.
- ASTM E520-08(2023)
- Release Date
- 2023
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E520-08(2023)e1
- Latest
- ASTM E520-08(2023)e1
- Scope
- 1.1 This practice covers photomultiplier properties that are essential to their judicious selection and use in emission and absorption spectrometry. Descriptions of these properties can be found in the following sections: Section Structural Features 4 General 4.1 External Structure 4.2 Internal Structure 4.3 Electrical Properties 5 General 5.1 Optical-Electronic Characteristics of the Photocathode 5.2 Current Amplification 5.3 Signal Nature 5.4 Dark Current 5.5 Noise Nature 5.6 Photomultiplier as a Component in an Electrical Circuit 5.7 Precautions and Problems 6 General 6.1 Fatigue and Hysteresis Effects 6.2 Illumination of Photocathode 6.3 Gas Leakage 6.4 Recommendations on Important Selection Criteria 7 1.2 Radiation in the frequency range common to analytical emission and absorption spectrometry is detected by photomultipliers presently to the exclusion of most other transducers. Detection limits, analytical sensitivity, and accuracy depend on the characteristics of these current-amplifying detectors as well as other factors in the system. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E520-08(2023) Referenced Document
- ASTM E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E520-08(2023) history
- 2023 ASTM E520-08(2023)e1 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- 2023 ASTM E520-08(2023) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- 2015 ASTM E520-08(2015)e1 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- 2008 ASTM E520-08 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- 1998 ASTM E520-98(2003) Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
- 1998 ASTM E520-98 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
