ASTM D3860-98(2020)
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

Standard No.

ASTM D3860-98(2020)

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D3860-98(2020)

Scope

1.1 This practice covers the determination of the adsorptive capacity of activated carbon to remove undesirable constituents from water and waste water. It can be used to evaluate the adsorptive capacity of activated or reactivated carbon. 1.2 This practice is not recommended unless special precautions are taken to reduce loss during sample preparation and analysis. 1.3 This practice is recommended to determine the adsorptive capacity of activated carbon for the following applications, but is not limited to these applications: 1.3.1 Removal of color from dye mill waste water, 1.3.2 Removal of taste or odor constituents, or both, from potable waters, 1.3.3 Removal of toxicants from water, 1.3.4 Removal of surface-active agents from water, 1.3.5 Removal of BOD5 from sanitary waste waters, and 1.3.6 Removal of TOC from industrial waste waters. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D3860-98(2020) Referenced Document

• ASTM D1129 Standard Terminology Relating to Water
• ASTM D1193 Standard Specification for Reagent Water
• ASTM D2652 Standard Terminology Relating to Activated Carbon
• ASTM D2867 Standard Test Methods for Moisture in Activated Carbon
• ASTM D3370 Standard Practices for Sampling Water from Closed Conduits
• ASTM E300 Standard Practice for Sampling Industrial Chemicals

ASTM D3860-98(2020) history

• 2020 ASTM D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
• 1998 ASTM D3860-98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
• 1998 ASTM D3860-98(2008) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
• 1998 ASTM D3860-98(2003) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
• 1998 ASTM D3860-98 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique