ASTM D858-17
Standard Test Methods for Manganese in Water

Standard No.

ASTM D858-17

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D858-17

Scope

1.1 These test methods cover the atomic absorption determination of dissolved and total recoverable manganese in water and certain wastewaters. Section 34 on Quality Control pertains to these test methods. Three test methods are given as follows: Test Method Concentration Range Sections A—Atomic Absorption, Direct 0.1 to 5 mg/L 7 to 15 B—Atomic Absorption, Chelation-Extraction 10 to 500 µg/L 16 to 24 C—Atomic Absorption, Graphite Furnace 5 to 50 µg/L 25 to 33 1.2 Test Methods A, B, and C were used successfully on reagent grade and natural waters. Other matrices used in the study were brine (Test Method B), effluent from a wood treatment plant, and condensate from a medium BTU coal gasification process (Test Method C). It is the user’s responsibility to ensure the validity of a test method for waters of untested matrices. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 11.7, 20.2, 20.9, and 22.11. 1.5 Former Test Method A (Colorimetric) was discontinued. For historical information, see Appendix X1. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D858-17 Referenced Document

• ASTM D1066 Standard Practice for Sampling Steam
• ASTM D1068 Standard Test Methods for Iron in Water
• ASTM D1129 Standard Terminology Relating to Water
• ASTM D1193 Standard Specification for Reagent Water
• ASTM D1687 Standard Test Methods for Chromium in Water
• ASTM D1688 Standard Test Methods for Copper in Water
• ASTM D1691 Standard Test Methods for Zinc in Water
• ASTM D1886 Standard Test Methods for Nickel in Water
• ASTM D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
• ASTM D2777 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
• ASTM D3370 Standard Practices for Sampling Water from Closed Conduits
• ASTM D3557 Standard Test Methods for Cadmium in Water
• ASTM D3558 Standard Test Methods for Cobalt in Water
• ASTM D3559 Standard Test Methods for Lead in Water
• ASTM D3919 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
• ASTM D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents*， 2018-10-15 Update
• ASTM D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma8212;Mass Spectrometry
• ASTM D5810 Standard Guide for Spiking into Aqueous Samples *， 2021-07-01 Update
• ASTM D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis

ASTM D858-17 history

• 2017 ASTM D858-17 Standard Test Methods for Manganese in Water
• 2012 ASTM D858-12 Standard Test Methods for Manganese in Water
• 2007 ASTM D858-07 Standard Test Methods for Manganese in Water
• 2002 ASTM D858-02 Standard Test Methods for Manganese in Water
• 1995 ASTM D858-95 Standard Test Methods for Manganese in Water