ASTM C553-13(2019)
Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

Standard No.

ASTM C553-13(2019)

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM C553-13(2019)

Scope

1.1 This specification covers the classification, composition, physical properties, and dimensions of mineral fiber (rock, slag, or glass) blanket intended for use as thermal insulation on surfaces operating at temperatures between 0°F (–18°C) and 1200°F (649°C). For specific applications, the actual temperature limits shall be agreed upon between the supplier and the purchaser. 1.2 The orientation of the fibers within the blanket is primarily parallel to the principal surface (face). This specification does not cover fabricated pipe and tank wrap insulation where the insulation has been cut and fabricated to provide a fiber orientation that is perpendicular to the surface (face). 1.3 For satisfactory performance, properly installed protective vapor retarders must be used in below ambient temperature applications to reduce movement of water vapor through or around the insulation towards the colder surface. Failure to use a vapor retarder can lead to insulation and system damage. Refer to Practice C921 to aid material selection. Although vapor retarders are not part of this specification, properties required in Specification C1136 are pertinent to application or performance. 1.4 This standard does not purport to provide the performance requirements of hourly-rated fire systems. Consult the manufacturer for the appropriate system. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C553-13(2019) Referenced Document

• ASTM C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
• ASTM C1058 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
• ASTM C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
• ASTM C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
• ASTM C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
• ASTM C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
• ASTM C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
• ASTM C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
• ASTM C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings*， 2022-09-01 Update
• ASTM C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
• ASTM C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
• ASTM C168 Standard Terminology Relating to Thermal Insulation*， 2022-05-01 Update
• ASTM C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
• ASTM C390 Standard Criteria for Sampling and Acceptance of Preformed Thermal Insulation Lots
• ASTM C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
• ASTM C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
• ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
• ASTM C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
• ASTM C680 Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the Use of a Computer Program
• ASTM C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
• ASTM C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
• ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
• CAN/ULC-S102 

ASTM C553-13(2019) history

• 2019 ASTM C553-13(2019) Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2013 ASTM C553-13 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2011 ASTM C553-11 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2008 ASTM C553-08 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2002 ASTM C553-02e1 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2002 ASTM C553-02 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 2000 ASTM C553-00 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• 1970 ASTM C553-70(1977) Standard Specification for Mineral Fiber Blanket And Felt Insulation (Industrial Type)