ASTM C852/C852M-17(2022)
Standard Guide for Design Criteria for Plutonium Gloveboxes
- Standard No.
- ASTM C852/C852M-17(2022)
- Release Date
- 2022
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM C852/C852M-17(2022)
- Scope
- 1.1 This guide defines criteria for the design of glovebox systems to be used for the handling of plutonium in any chemical or physical form or isotopic composition or when mixed with other elements or compounds. Not included in the criteria are systems auxiliary to the glovebox systems such as utilities, ventilation, alarm, and waste disposal. Also not addressed are hot cells or open-face hoods. 1.2 The scope of this guide excludes specific license requirements relating to provisions for criticality prevention, hazards control, safeguards, packaging, and material handling. Observance of this guide does not relieve the user of the obligation to conform to all federal, state, and local regulations for design and construction of glovebox systems. 1.3 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C852/C852M-17(2022) Referenced Document
- ANSI N13.1 Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stacks and Ducts of Nuclear Facilities*， 2024-04-22 Update
- ANSI/ASME AG-1 Code on Nuclear Air and Gas Treatment*， 2024-04-22 Update
- ANSI/ASME NQA-1 Quality Assurance Requirements for Nuclear Facility Applications
- ASTM A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes*， 2023-11-01 Update
- ASTM A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
- ASTM A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service*， 2024-03-01 Update
- ASTM A312/A312M Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
- ASTM A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
- ASTM A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- ASTM F837 Standard Specification for Stainless Steel Socket Head Cap Screws
ASTM C852/C852M-17(2022) history
- 2022 ASTM C852/C852M-17(2022) Standard Guide for Design Criteria for Plutonium Gloveboxes
- 2017 ASTM C852/C852M-17 Standard Guide for Design Criteria for Plutonium Gloveboxes
- 2016 ASTM C852/C852M-16 Standard Guide for Design Criteria for Plutonium Gloveboxes
- 2009 ASTM C852-09 Standard Guide for Design Criteria for Plutonium Gloveboxes
- 1993 ASTM C852-93(1997) Standard Guide for Design Criteria for Plutonium Gloveboxes
