This document gives the safety requirements and measures for stationary and displaceable hand-fed single spindle vertical moulding machines@ hereinafter referred to as ??machines??@ designed to cut wood and materials with similar physical characteristics to wood. NOTE 1 For the definitions of stationary and displaceable machines@ see ISO 19085-1:2017@ 3.4 and 3.5. It deals with all significant hazards@ hazardous situations and events as listed in Clause 4@ relevant to the machines when they are operated@ adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also@ transport@ assembly@ dismantling@ disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards@ e.g. sharp edges of the machine frame@ see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices/additional working units@ whose hazards have been dealt with: a) device for the arbor to be vertically adjustable relative to the table; b) device to tilt the arbor; c) device to fit a manually operated tenoning sliding table; d) glass bead saw unit; e) adjustable table insert; f) device for changing the direction of rotation of the spindle; g) device for fixing shank mounted tools on the arbor; h) interchangeable arbor; i) quick tool/arbor change system; j) demountable power feed unit; k) support for the demountable power feed unit with power driven adjustments. This document does not apply to 1) machines equipped with outboard bearings@ 2) machines equipped with powered movements of a front extension table and/or a tenoning sliding table@ and 3) machines with an intended maximum tool diameter of less than or equal to 180 mm. NOTE 3 Hand-held motor-operated electric tools are dealt with in IEC 60745-1 together with IEC 60745-2-17. NOTE 4 Transportable motor-operated electric tools are dealt with in IEC 61029-1:1990@ IEC 61029-2- 8:1995/AMD1:1999 and IEC 61029-2-8:1995/AMD2:2001 This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.
EN ISO 19085-6:2017 history
2017EN ISO 19085-6:2017 "Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines (""toupies"")"