ASTM D3580-95(2015)
Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- Standard No.
- ASTM D3580-95(2015)
- Release Date
- 2015
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D3580-22
- Latest
- ASTM D3580-22
- Scope
- 1.1 These test methods cover the determination of resonances of unpackaged products and components of unpackaged products by means of vertical linear motion at the surface on which the product is mounted for test. Two alternate test methods are presented: Test Method A—Resonance Search Using Sinusoidal Vibration, and Test Method B—Resonance Search Using Random Vibration. NOTE 1—The two test methods are not necessarily equivalent and may not produce the same results. It is possible that tests using random vibration may be more representative of the transport environment and may be conducted more quickly than sine tests. 1.2 This information may be used to examine the response of products to vibration for product design purposes, or for the design of a container or interior package that will minimize transportation vibration inputs at these critical frequencies, when these products resonances are within the expected transportation environment frequency range. Since vibration damage is most likely to occur at product resonant frequencies, these resonances may be thought of as potential product fragility points. 1.3 Information obtained from the optional dwell test methods may be used to assess the fatigue characteristics of the resonating components and for product modification. This may become necessary if the response of a product would require design of an impractical or excessively costly shipping container. 1.4 These test methods do not necessarily simulate the vibration effects that the product will encounter in its operational or in-use environment. Other, more suitable test procedures should be used for this purpose. 1.5 Test levels given in these test methods represent the correlation of the best information currently available from research investigation and from experience in the use of these test methods. If more applicable or accurate data are available, they should be substituted. 1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Section 6 for specific precautionary statements.
ASTM D3580-95(2015) Referenced Document
- ASTM D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
- ASTM D4728 Standard Test Method for Random Vibration Testing of Shipping Containers
- ASTM D996 Standard Terminology of Packaging and Distribution Environments
- ASTM E122 Standard Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error, the Average for Characteristic of a Lot or Process
ASTM D3580-95(2015) history
- 2022 ASTM D3580-22 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- 2015 ASTM D3580-95(2015) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- 2010 ASTM D3580-95(2010) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- 1995 ASTM D3580-95(2004) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
- 1995 ASTM D3580-95(1999) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
