1 Scope
This document describes three procedures (A, B and C) covering determinations of flash no-flash and flash point .
Rapid equilibrium procedures A and B are applicable to flash no-flash and flash point tests of paints, including water-borne paints, varnishes, binders for paints and
varnishes, adhesives, solvents, petroleum products including aviation turbine, diesel
and kerosene fuels, fatty acid methyl esters and related products over the temperature range –30 °C to 300 °C. The rapid equilibrium procedures are used to determine whether a product will or will not flash at a specified
temperature ( flash no-flash procedure A) or the flash point of a sample (procedure B). When used in conjunction with the flash detector (A.1.6), this document is also suitable to determine the flash point of fatty acid methyl esters ( FAME ). The validity of the precision is given in Table 2.
Non-equilibrium procedure C is applicable to petroleum products including aviation turbine, diesel
and kerosine fuels, and related petroleum products, over the temperature range –20 °C
to 300 °C. The non-equilibrium procedure is automated to determine the flash point . Precision has been determined over the range 40 °C to 135 °C.
For specifications and regulations, procedures A or B are routinely used (see 10.1.1).
BS EN ISO 3679:2022 Referenced Document
ISO 1513 Paints and varnishes - Examination and preparation of test samples
ISO 15528 Paints, varnishes and raw materials for paints and varnishes — Sampling
ISO 17034 General requirements for the competence of reference material producers
ISO 3171 Petroleum liquids; automatic pipeline sampling
ISO Guide 35 Certification of reference materials — General and statistical principles
BS EN ISO 3679:2022 history
2022BS EN ISO 3679:2022 Determination of flash point. Method for flash no-flash and flash point by small scale closed cup tester
2015BS EN ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method
2004BS EN ISO 3679:2004 Methods of test for petroleum and its products - BS 2000-523: Determination of flash point - Rapid equilibrium closed cup method