DS/EN ISO 8580:1995
Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions

Standard No.

DS/EN ISO 8580:1995

Release Date

1995

Published By

Danish Standards Foundation

Status

Be replaced 2012-01

Replace By

DS/EN ISO 30013:2012

Latest

DS/EN ISO 30013:2012

Scope

This International Standard specifies three methods for deter-mining the resistance of the outer cover of hoses to ultra-violet light : Method 1 : for bore sizes up to and including 25 mm, the test being carried out on the hose itself; Method 2 : for bore sizes greater than 25 mm, the test being carried out on a test piece from the hose wall; Method 3 : for bore sizes greater than 25 mm, the test being carried out on a test piece from the hose cover. Method 1 or 2 should normally be used. Method 3 should be used only if it is not possible to carry out the test in accordance with Method 2.

DS/EN ISO 8580:1995 history

• 2012 DS/EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
• 1995 DS/EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions

DS/EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions was changed to DS/EN ISO 30013:2012 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties.