ASTM D38-94(2000)e1
Standard test method for chromium oxide in alkaline chromium in tanning liquids
- Standard No.
- ASTM D38-94(2000)e1
- Release Date
- 2000
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM D38-94(2000)e1
- Scope
- 1.1 These test methods cover sampling of creosote, creosote-coal tar solutions, creosote-petroleum solutions, and oilborne and waterborne preservatives. NOTE 1—See Specification D 390, for Coal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbers for Marine, Land, and Fresh Water Use,2 Specification D 391 for Creosote-Coal Tar Solution,2 and Specification D 1858, for Creosote-Petroleum Solution.2 1.1.1 Creosote and creosote solutions are homogeneous liquids, except for their moisture content. At atmospheric temperatures, however, part of the creosote is usually in crystalline form, and shall be heated to a temperature at which it is entirely liquid before sampling. 1.1.1.1 When sampling creosote and creosote solutions, the object is to obtain a sample that will be representative of the water content, and the methods of sampling described are intended to accomplish that purpose. 1.1.2 Recommended test methods are given for sampling a preservative in a liquid or solid state and in the several types of containers in which they are likely to be encountered. Creosote, creosote-coal tar, and creosote-petroleum solutions may be in the form of a liquid or semiliquid. Oilborne and waterborne preservatives may be in the solid state, in concentrated solutions, or in ready-to-use solutions. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D38-94(2000)e1 Referenced Document
- ASTM D1033
- ASTM D1035
- ASTM D1274 Standard Test Methods for Chemical Analysis of Pentachlorophenol
- ASTM D1326 Standard Test Methods for Chemical Analysis of Ammoniacal Copper Arsenate and Ammoniacal Copper Zinc Arsenate
- ASTM D1627 Standard Test Methods for Chemical Analysis of Acid Copper Chromate
- ASTM D1628 Standard Test Methods for Chemical Analysis of Chromated Copper Arsenate
- ASTM D168 Standard test method for copper content in water
- ASTM D246 Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
- ASTM D3176 Standard Practice for Ultimate Analysis of Coal and Coke
- ASTM D3180 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
- ASTM D346 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
- ASTM D367 Standard specification for rigid polyvinyl chloride baffles
- ASTM D368 Standard Test Method for Specific Gravity of Creosote and Oil-Type Preservatives*， 2002-01-01 Update
- ASTM D369 Standard Test Method for Specific Gravity of Creosote Fractions and Residue*， 2002-01-01 Update
- ASTM D370 Standard Test Method for Dehydration of Oil-Type Preservatives
- ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D38-94(2000)e1 history
- 2000 ASTM D38-94(2000)e1 Standard test method for chromium oxide in alkaline chromium in tanning liquids
