SAE AMS4168E-1979
Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Stress-Relief Stretched@ Unstraightened (UNS A97075)

Standard No.
SAE AMS4168E-1979
Release Date
1979
Published By
SAE - SAE International
Status
 1992-01
Replace By
SAE AMS4168G-1992
Latest
SAE AMS4168K-2012
Scope
Form: This specification covers an aluminum alloy in the form of extruded bars@ rods@ wire@ shapes@ and tubing. Application: Primarily for parts subject to excessive warpage during machining and for parts requiring high strength and whose fabrication does not involve welding or forming. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.

SAE AMS4168E-1979 history

  • 2012 SAE AMS4168K-2012 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated@ Stress Relieved by Stretching@ and Precipitation Heat Treated@ Unstraightened (UNS A97075)
  • 2011 SAE AMS4168F-2011 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated Unstraightened
  • 2008 SAE AMS4168J-2008 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
  • 2003 SAE AMS4168J-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
  • 1998 SAE AMS4168H-1998 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated@ Stress Relieved by Stretching@ and Precipitation Heat Treated@ Unstraightened (UNS A97075)
  • 1992 SAE AMS4168G-1992 Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated@ Stress Relieved by Stretching@ and Precipitation Heat Treated@ Unstraightened
  • 1979 SAE AMS4168E-1979 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Stress-Relief Stretched@ Unstraightened (UNS A97075)
  • 1978 SAE AMS4168D-1978 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
  • 1968 SAE AMS4168C-1968 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
  • 1967 SAE AMS4168B-1967 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
  • 1963 SAE AMS4168A-1963 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
  • 1960 SAE AMS4168-1960 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6510) Stress-Relief Stretched, Unstraightened



Copyright ©2024 All Rights Reserved