BS EN 13094:2020+A1:2022 PDF

Standard No.: BS EN 13094:2020+A1:2022
Release Date: 2020
Published By: British Standards Institution (BSI)
Latest: BS EN 13094:2020+A1:2022

Scope: This document specifies requirements for the design and construction of metallic gravity-discharge tanks intended for the carriage of substances having a vapour pressure not exceeding 110 kPa (1,1 bar) (absolute pressure) at 50 °C. the shell may occur, for example due to flow restrictions in vapour recovery systems or opening pressures of breather devices. It is important that these operating pressures do not exceed the test pressure of the tank or 0,5 bar, whichever is the highest. This document specifies requirements for openings, closures, pipework, mountings for service equipment and structural equipment. through the shell. This document is applicable to aircraft refuelers that are used on public roads. It is also applicable to inter-modal tanks (e.g. tank containers and tank swap bodies) for the transport of dangerous goods by road and rail.

BS EN 13094:2020+A1:2022 Referenced Document

EN 10028-2 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10204 Metallic products - Types of inspection documents*， 2024-04-22 Update
EN 13317 Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
EN 13445-3:2014 Unfired pressure vessels - Part 3: Design
EN 14025 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction*， 2023-12-20 Update
EN 14564 Tanks for transport of dangerous goods - Terminology
EN ISO 10042 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
EN ISO 14732 Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials [Superseded: CEN EN 1418]
EN ISO 15607 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2019)
EN ISO 15609-1 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
EN ISO 15609-2 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019)
EN ISO 15613 Specification and qualification of welding procedure for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
EN ISO 17635 Non-destructive testing of welds - General rules for metallic materials
EN ISO 17636-1 Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2022)*， 2022-08-03 Update
EN ISO 17637 Non-destructive testing of welds - Visual testing of fusion-welded joints
EN ISO 17640 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)
EN ISO 3834-1 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)*， 2021-08-31 Update
EN ISO 3834-2 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2021)*， 2021-03-31 Update
EN ISO 5817 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)*， 2023-03-15 Update
EN ISO 6892-1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
EN ISO 7500-1 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
EN ISO 9606-1 Qualification testing of welders - Fusion welding - Part 1: Steels
EN ISO 9606-2 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)*， 2024-04-22 Update
ISO 1496-3 Series 1 freight containers — Specification and testing — Part 3: Tank containers for liquids, gases and pressurized dry bulk

BS EN 13094:2020+A1:2022 history

2020 BS EN 13094:2020+A1:2022 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
2020 BS EN 13094:2020 Tanks for the transport of dangerous goods. Metallic gravity-discharge tanks. Design and construction
2015 BS EN 13094:2015 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
2008 BS EN 13094:2008 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
2004 BS EN 13094:2004 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction

Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction

BS EN 13094:2020+A1:2022Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction

BS EN 13094:2020+A1:2022 Referenced Document

BS EN 13094:2020+A1:2022 history

BS EN 13094:2020+A1:2022
Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction