1 Scope
This document deals with safety of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU).
This part of IEC 62282 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks as defined in ISO 5053‑1, except for:
— rough-terrain trucks;
— non-stacking low-lift straddle carriers;
— stacking high-lift straddle carriers;
— rough-terrain variable-reach trucks;
— slewing rough-terrain variable-reach trucks;
— variable-reach container handlers;
— pedestrian propelled trucks.
This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks.
The following fuels are considered within the scope of this document:
— gaseo...
BS EN IEC 62282-4-101:2022 Referenced Document
IEC 60079-0 Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-29-1 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases*, 2024-04-22 Update
IEC 60079-29-4 Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gas
IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements*, 2024-04-22 Update
IEC 60227-3 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring*, 2024-02-22 Update
IEC 60227-5 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)*, 2024-02-22 Update
IEC 60364-4-41:2005 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60364-4-41:2005/AMD1:2017 Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*, 2024-04-22 Update
IEC 60584-1 Thermocouples - Part 1: Ed. 3.0: EMF specifications and tolerances
IEC 60812 Failure modes and effects analysis (FMEA and FMECA)
IEC 60947-3 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Corrigendum 1
IEC 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices*, 2024-03-26 Update
IEC 60950-1:2005 Information technology equipment - Safety - Part 1: General requirements
IEC 60950-1:2005/AMD1:2009 Information technology equipment - Safety - Part 1: General requirements; Amendment 1
IEC 61204-7 Low-voltage switch mode power supplies - Part 7: Safety requirements
IEC 61558-1 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
IEC 62133-1 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 1: Nickel systems
IEC 62391-1 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
IEC 62391-2 Fixed electric double layer capacitors for use in electronic equipment - Part 2: Sectional specification: Electric double layer capacitors for power application
IEC 62619 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications
IEC TS 61430 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
ISO 10380 Pipework - Corrugated metal hoses and hose assemblies
ISO 10442 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors
ISO 10806 Pipework - Fittings for corrugated metal hoses
ISO 11114-4 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
ISO 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction
ISO 13226 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 13849-1 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design*, 2023-04-26 Update
ISO 13849-2 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
ISO 14113 Gas welding equipment.Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
ISO 1419 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
ISO 1421 Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break
ISO 15649 Petroleum and natural gas industries - Piping
ISO 16010 Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
ISO 16111:2018 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride
ISO 17268 Gaseous hydrogen land vehicle refuelling connection devices
ISO 1798 Flexible cellular polymeric materials - Determination of tensile strength and elongation at break
ISO 180 Plastics. Determination of Izod impact strength*, 2023-06-07 Update
ISO 19881 Gaseous hydrogen — Land vehicle fuel containers
ISO 19882 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers
ISO 20898 Industrial trucks - Electrical requirements
ISO 21927-3 Smoke and heat control systems - Part 3: Specifications for powered smoke and heat exhaust ventilators
ISO 23551-1 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves
ISO 2440 Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 1: Design principles
ISO 3691-1 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks — Amendment 2
ISO 3864-1 Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings
ISO 4038 Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings
ISO 4080 Rubber and plastics hoses and hose assemblies - Determination of permeability to gas
ISO 4675 Rubber- or plastics-coated fabrics - Low-temperature bend test
ISO 5053-1 Industrial trucks — Vocabulary — Part 1: Types of industrial trucks