HJ 1208-2021 (English Version) PDF

Scope: This standard specifies the general requirements for self-monitoring of industrial pollutant discharge units of recycled non-ferrous metals (recycled copper, recycled aluminum, recycled lead, recycled zinc), the basic content and requirements for the development of monitoring plans, information recording and reporting. This standard is applicable to pollutant discharge units that produce non-ferrous metals and their alloys from scrap non-ferrous metals as raw materials, and carry out self-monitoring of the water and gas pollutants, noise and the impact on the quality of the surrounding environment during the production and operation stage. Sewage discharge units that use non-ferrous metal secondary resources such as copper-containing sludge, zinc-containing steelmaking smoke, lead-containing leaching slag as main raw materials to produce non-ferrous metals and their alloys may refer to this standard. The self-monitoring requirements for self-prepared thermal power generating units (factories) and supporting power boilers shall be implemented in accordance with HJ820.

HJ 1208-2021 Referenced Document

GB 31574 Emission standards of pollutants for secondary copper, aluminum, lead and Zink industry
HJ 164 Technical Specifications for Groundwater Environmental Monitoring
HJ 194 Technical specification for manual monitoring of ambient air quality "Revision No. 1"
HJ 2.2 Technical guidelines for environmental impact assessment—Atmospheric environment
HJ 2.3 Technical guidelines for environmental impact assessment surface water environment
HJ 442.8 Monitoring of Technical Specifications for Environmental Monitoring of Coastal Sea Areas Part VIII Direct Discharge of Sea Pollution Sources and Impacts on Water Environment of Coastal Sea Areas
HJ 610 Environmental Impact Assessment Technical Guidelines Groundwater Environment
HJ 664 Technical regulation for selection of ambient air quality monitoring stations (on trial)
HJ 819 General Principles of Technical Guidelines for Self-Monitoring of Sewage Discharge Units
HJ 820 Self-monitoring guidelines for pollution sources—Thermal power generation and boiler
HJ 863.4 Technical specification for application and issuance of pollutant permit non-ferrous metal metallurgy industry—secondary non-ferrous metal
HJ 964 Technical guidelines for environmental impact assessment ―soil environment
HJ/T 166 Technical specification for soil environmental monitoring
HJ/T 91 Technical Specifications Requirements for Monitoring of Surface Water and Waste Water

2021 HJ 1208-2021 Self-monitoring Technical Guidelines for Pollutant Discharging Units Nonferrous Metals Industry—Recycled Metals