ASTM G62-22
Standard Test Methods for Holiday Detection in Pipeline Coatings
- Standard No.
- ASTM G62-22
- Release Date
- 2022
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM G62-23
- Latest
- ASTM G62-23
- Scope
- 1.1 These test methods cover the apparatus and procedure for detecting holidays in pipeline type coatings. 1.2 Method A is designed to detect holidays such as pinholes and voids in thin-film coatings from 0.025 to 0.254 mm (1 to 10 mils) in thickness using ordinary tap water and an applied voltage of less than 100 V d-c. It is effective on films up to 0.508 mm (20 mils) thickness if a wetting agent is used with the water. It should be noted, however, that this method will not detect thin spots in the coating. This may be considered to be a nondestructive test because of the relatively low voltage. 1.3 Method B is designed to detect holidays such as pinholes and voids in pipeline coatings; but because of the higher applied voltages, it can also be used to detect thin spots in the coating. This method can be used on any thickness of pipeline coating and utilizes applied voltages between 900 and 20 000 V d-c.2 This method is considered destructive because the high voltages involved generally destroy the coating at thin spots. 1.4 The values stated in SI units to three significant decimals are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM G62-22 Referenced Document
- ASTM A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM G62-22 history
- 2023 ASTM G62-23 Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines
- 2022 ASTM G62-22 Standard Test Methods for Holiday Detection in Pipeline Coatings
- 2014 ASTM G62-14 Standard Test Methods for Holiday Detection in Pipeline Coatings
- 2007 ASTM G62-07(2013) Standard Test Methods for Holiday Detection in Pipeline Coatings
- 2007 ASTM G62-07 Standard Test Methods for Holiday Detection in Pipeline Coatings
- 1987 ASTM G62-87(1998)e1 Standard Test Methods for Holiday Detection in Pipeline Coatings
- 1987 ASTM G62-87(1998) Standard Test Methods for Holiday Detection in Pipeline Coatings
