SAE J1926-2-2010
Connections for General use and Fluid Power-Ports and Stud ends with ISO 725 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends

Standard No.

SAE J1926-2-2010

Release Date

2010

Published By

SAE - SAE International

Status

Be replaced 2016-09

Replace By

SAE J1926-2-2016

Latest

SAE J1926-2-2016

Scope

This part of SAE J1926 specifies dimensions@ performance requirements@ and test procedures for adjustable and nonadjustable heavy-duty (S series) stud ends with ASME B1.1 threads for use in fluid power and general applications and the O-rings used with them that are currently not listed in SAE J515. Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 41.3 MPa for adjustable stud ends. The permissible working pressure depends upon materials@ design@ working conditions@ application@ etc. For threaded ports and stud ends specified in new designs for hydraulic fluid power applications@ only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179@ ISO 9974@ and ISO 11926 shall not be used for new design in hydraulic fluid power applications. NOTE: This document specifies inch as well as metric hexes for the stud ends. Therefore@ any product drawing specifying stud ends in accordance with this document must specify hex type@ inch or metric@ to assure getting intended hex. Stud ends or parts specified before January 1@ 2010 using this standard@ shall be supplied with inch hexes@ unless otherwise specified. Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating. Appendix A of this document is informative.

SAE J1926-2-2010 history

• 2016 SAE J1926-2-2016 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends
• 2010 SAE J1926-2-2010 Connections for General use and Fluid Power-Ports and Stud ends with ISO 725 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends
• 2006 SAE J1926-2-2006 Connections for General Use and Fluid PowerPorts and Stud Ends with ASME B1.1 Threads and O-Ring SealingPart 2: Heavy-Duty (S Series) Stud Ends
• 1995 SAE J1926-2-1995 Connections for General use and Fluid Power-Ports and Stud ends with ISO 725 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends