ASTM B650-95(2023)
Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- Standard No.
- ASTM B650-95(2023)
- Release Date
- 2023
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM B650-23
- Latest
- ASTM B650-23
- Scope
- 1.1 This specification covers the requirements for electrodeposited chromium coatings applied to ferrous alloys for engineering applications. 1.2 Electrodeposited engineering chromium, which is sometimes called “functional” or “hard” chromium, is usually applied directly to the basis metal and is much thicker than decorative chromium. Engineering chromium is used for the following: 1.2.1 To increase wear and abrasion resistance, 1.2.2 To increase fretting resistance, 1.2.3 To reduce static and kinetic friction, 1.2.4 To reduce galling or seizing, or both, for various metal combinations, 1.2.5 To increase corrosion resistance, and 1.2.6 To build up undersize or worn parts. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B650-95(2023) Referenced Document
- ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
- ASTM B177 Standard Guide for Engineering Chromium Electroplating
- ASTM B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating
- ASTM B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating
- ASTM B320 Standard Practice for Preparation of Iron Castings for Electroplating
- ASTM B374 Standard Terminology Relating to Electroplating
- ASTM B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
- ASTM B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method
- ASTM B507 Standard Practice for Design of Articles to Be Electroplated on Racks
- ASTM B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- ASTM B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- ASTM B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
- ASTM B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- ASTM B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
- ASTM B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
- ASTM D3951 Standard Practice for Commercial Packaging
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
- ASTM F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Gaseous Hydrogen Embrittlement
ASTM B650-95(2023) history
- 2023 ASTM B650-23 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 2023 ASTM B650-95(2023) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 2018 ASTM B650-95(2018) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 1995 ASTM B650-95(2013) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 2008 ASTM B650-95(2008) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 1995 ASTM B650-95(2002) Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
- 1995 ASTM B650-95 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
