Polylactic acid filaments were printed into bending specimens using a 3D printer. The sample size should comply with the provisions of 6.1.2 in GB/T9341-2008. Recommended printing parameters: printing temperature 210℃, hot bed temperature 50℃, printing speed 80mm/s, vertical printing. If other printing parameters are used, they must be noted in the report. According to the regulations of GB/T9341-2008, the speed is 2mm/min. Follow the provisions of Chapter 9 of GB/T9341-2008.
T/GZZJ 07-2020 history
2020T/GZZJ 07-2020 Determination of bending properties of polylactic acid filaments for 3D printing