1 Scope
This document establishes a classification for emulsion polymer isocyanate (EPI) adhesives according to their suitability for use in load-bearing timber products in defined
climatic exposure conditions, and specifies performance requirements for such adhesives
for the industrial manufacture of load-bearing timber products only.
The performance requirements of this document are applicable to the adhesives only,
not to the timber products. This document does not cover the performance of adhesives
for on-site gluing (except for factory-like conditions) or the production of wood-based
panels, except solid wood panels, or modified and stabilized wood with considerably
reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood
and polymer impregnated wood.
This document is primarily intended for use by adhesive manufacturers and for use
in timber products bonded with adhesives, to assess or control the quality of adhesives.
This document only specifies the performance of an adhesive for use in an environment
corresponding to the defined conditions.
Such an adhesive meeting the requirements of this document for its type is adequate
for use in load-bearing timber products, provided that the bonding process has been
carried out according to an appropriate product standard.
BS EN 16254:2023 Referenced Document
EN 13183-2 Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method
EN 13183-3 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
EN 14080 Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 15416-1 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Longterm tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass house t
EN 15416-3 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
EN 15416-4 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
EN 15416-5 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
EN 302-1 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
EN 302-2 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
EN 302-3 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
EN 302-4 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
EN 302-7 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 302-8 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear*, 2023-04-26 Update